DSC-J650 Autopsy table
The sink has a manual faucet and an induction faucet.
Open holes on both sides of the countertop for ventilation.
Three boards on the countertop can be removed for cleaning.
The crusher under the sink can crush small tissues and small bones.
◆ The arc-shaped connection in the tabletop is not easy to scale, and it is easy to clean and disinfect There is a hair isolator in the pool to prevent hair from entering the drainage pipe and blocking it.
◆ Equipped with hot and cold regulator, induction manual faucet (requires water heater connection)
◆ Water pressure of the mobile spray irrigation gun can be adjusted, which can wash the overall dirt on the dissection table.
◆ Sink size 450 * 320 * 180mm, easy to clean and disinfect by stamping.
◆ The sides of the table frame are inclined at an angle of 30 °.
◆ Leakage protection device, waterproof socket 220V/50Hz.
◆ Negative pressure exhaust system is inclined by the table top 30. The oblong holes on the inner side of the frame are exhausted downwards. The oblong holes are φ06x36mm. There are a total of 240 holes (need to be connected to the external exhaust system). The exhaust gas is used to reduce harmful gases in the room. Protecting operator safety
304 stainless steel sink
Mesa mesh plate drains easily
Powerful waste disposal
|Products Name||Morgue autopsy cleaning table hospital autopsy table|
|Application||mortuary autopsy table|
|Material||304 stainless steel|
|Voltage||220v/ 50Hz Optional 110v , 60Hz|