ZL-B002CallGuardrailLuxuryWheelThree-rockerNursingBed

ZL-B002CallGuardrailLuxuryWheelThree-rockerNursingBed

Short Description:

The back of the bed is inclined at 70±5°, the leg is in clined at 35±5°,and the over all load-bearing weight ≥240kg


Product Detail

Product Tags

Parameters

Dimensions: length 2150mm, width 900mm(including guardrail 960mm),overall lifting 480-730mm±;
Bedsize: 1935mm*830mm

Functions

1. The back of the bed is inclined at 70 ± 5 °, the leg is inclined at 35 ± 5 °, and the overall load-bearing weight ≥240kg.
2. Do to the V-shaped double support structure, punched and formed by 3.0mm cold-rolled steel.
plates ,the bed quality has largely improved. The removable force is 85% , making it more flexible when moving.
3. The side guardrail is a full-covered six-speed aluminum alloy guardrail, and the outer side of the guardrail is equipped with a plastic anti-collision strip of the color matching the bed. The total length of the guardrail is 1480mm, and the height when unfolded is ≥ 380mm. The D-shaped aluminum alloy handrails and six thickened guardrail pillars with hardened surfaces are more wear-resistant and will not deform during use. While shrinking and laying flat, engineers adopted methods to prevent the mattress from shifting and anti-pinching techniques.
4. The three sets of rockers are equipped with functions of folding up the bed board, folding up the leg bed board, and lifting the bed surface. The handle is made of high-quality ABS reinforced plastic material, and is pasted with a posture lift logo, which makes the operation more convenient. The screw is made of high-strength, high-quality 45# steel with built-in die steel nuts, which is silent, wear-resistant and compression-resistant. The screw is equipped with ABS dust protection device to enhance the service life and safety performance.
5. The bed panel is formed by punching and dismantling high-quality carbon steel plate, with porous design and good air permeability. The bottom of the bed panel is reinforced with a 30X20X1.2mm cold-rolled square tube, which has higher bearing capacity, more uniform force, no deformation, longer service life, anti-slip function, and beautiful appearance. A quilt block is installed at the end of the bed board to prevent the mattress from sliding and shifting when the back board is lifted.
6. There are 4 infusion rod sockets on both sides of the bed frame; 2 urine drainage bag hooks on both sides of the bottom of the bed frame.
7. At the foot of the bed is equipped with 4 5-inch imported silent luxury single-wrap wheels, 4 independent brakes, stable and reliable, and flexible in pushing.


  • Previous:
  • Next:

  • Write your message here and send it to us