ZL-B008B ABS ordinary single rocking nursing bed
Function
1 The back tilt angle is 70±5°;
2 Static load-bearing weight: ≥250 kg, adjustable load-bearing weight: ≥200 kg; the back bed surface adopts a double support structure, which is firm and firm, and the double support is 3.0 mm
The cold-rolled steel plate is stamped and formed to strengthen the bearing capacity of the back bedplate, and the rocker is less stressed, making it easier, flexible, and safer to shake.
3 The side guardrail is full-covered, with a total length of 1480 mm, and a height of 400 mm when unfolded; D-type aluminum alloy handrails, with surface hardening treatment; six aluminum alloy guardrails, wear-resistant, non-deformable, shrinkable and flat, slightly higher than the bed when shrinking The cushion can prevent the mattress from shifting; the lock key insurance can be set quickly
Position switch, with anti-pinch function; guardrail operating handle is made of high-quality ABS reinforced plastic injection molding, with excellent strength and operability;
4 The bed has a set of rockers to control the lifting function of the back bed panel; all high-quality ABS reinforced plastic material rocker handles, concealed design, paste
The posture lift logo makes the operation clear at a glance; the rocker handle has a beautiful appearance, foldable, made of steel and plastic, made of stretched steel, and has a jacket
ABS decorative parts, high strength, light weight, flexible and reliable, strong and durable, not easy to damage the handle, with steel folding lock, with anti-pinching
The function can effectively prevent accidental injury caused by the wrong operation. The connecting part of the guide rod and the lead screw, 45# steel cross connector, easy to shake
Live, stable, and safe. The screw rod is made of 45# die steel, and the structure of the all-steel transmission clutch system is wear-resistant, compressive, and has a long life.
There is no limit protection device in place, which can effectively prevent the lead screw and the universal joint system from being damaged when the lead screw is rotated to the extreme point and overload.
The service life and safety performance of the rod; the outer cover is ABS dust-proof sleeve, and the screw sleeve adopts high-quality φ32 cold-rolled pipe surface galvanizing treatment so that the sleeve can withstand
Better load and anti-rust effect.
5 High-quality cold-rolled board bent strip welded bed panel, solid and good air permeability. A mattress guardrail is installed at the end of the bed surface to prevent the bed when the backplate is raised and lowered
Pad sliding displacement;
6 There are 4 drip holder holes on both sides of the bed frame, and 2 urine drainage bag hooks on both sides of the bottom of the bed frame;
7 The foot of the bed is welded by high-quality cold-rolled pipe using carbon dioxide gas shielded welding process, which is more solid; the foot of the bed is installed with high-quality PP material
Quality square tube foot cover, better stability, and abrasion resistance;
8 The overall distance between the bed surface and the ground is 500mm, which is convenient for clinical inspection and operation, and sanitation.
Material
1 The head and footboards are all ABS reinforced plastic materials, one-time injection molding, seamless, easy to clean, not deformed, stable and reliable, and can also be used as CPR
Emergency use of the board; information card slot and anti-collision wrap angle are provided on the outside of the bed footboard, which has an anti-collision function; symmetrical quick hook seat, which can be quickly removed
Unloading to meet the needs of clinical emergency;
2 The bed frame adopts high-quality cold-rolled square tube 80X40X1.5 mm, and the beam is high-quality cold-rolled tube 50X30X2.0 mm; it is welded and formed by a fully automatic welding robot; the bed foot adopts cold-rolled square tube 50X50X1.5 mm and 30X30X1.2 mm Welding forming;
3 The outer frame of the bed panel is made of 30*30*1.5 mm high-quality cold-rolled pipe, and the inner is made of a high-quality cold-rolled carbon steel plate ≥1.0 mm, which is bent into strips and welded.
Durable;
4 The whole bed adopts double phosphating electrophoresis primer + electrostatic antibacterial powder coating, SGS international standard coating treatment. The bed body paint adopts antibacterial paint,
It has passed the inspection and certification of provincial institutions (copy of relevant certification documents must be provided), anti-bacterial, anti-acid and alkali corrosion, and anti-fading.
Configuration
Equipped with an ABS four-hook telescopic infusion rod; a sundries basket;
Optional
1 A high-quality ABS retractable bed meal board.
2 A high-density brown cotton mattress, waterproof jacket, easy to disassemble and clean, color can be selected.
