|Product Name：Autopsy table|
|Usage：hospitals, laboratories, morgues|
|Application: Morgue/Anatomy Room|
|Operation mode: removable cleaning table|
|Product packaging: special wooden box (plywood)|
Delicate technology, smooth surface, quality and high-end price union sales worldwide are highly favored.
Autopsy table is an equipment in the laboratory, utilizing 304 stainless steel material to make it waterproof, antiseptic. According to the needs of different customers, different styles and accessories are prepared for operation and use; a reasonable ventilation system can solve the harmful gas generated by formalin in the process of obtaining materials and provide a clean anatomical environment for the experimenters.
It is molded with SUS304 stainless steel material, fine workmanship, no dead corners, acid, and alkali resistance.
Protrusions around the countertop can prevent slippage and no scaling. It is equipped with upper and lower water and sinks. The sink is equipped with a drainage system and a hair isolator to prevent clogging. The manual hot and cold water faucet above the pool can adjust the water temperature, and the hose under the countertop sprays water. Adjustable pressure, equipped with 125mm diameter silent wheels, easy to move, with brakes.
Net weight: 58kg including package total weight 78kg
Packing size: 2450*800*320mm
◆ The arc-shaped connection in the tabletop is not easy to scale, and it is easy to clean and disinfect There is a hair isolator in the pool to prevent hair from entering the drainage pipe and blocking it.
◆ Equipped with hot and cold regulator, induction manual faucet (requires water heater connection)
◆ Water pressure of the mobile spray irrigation gun can be adjusted, which can wash the overall dirt on the dissection table.
◆ Sink size 450 * 320 * 180mm, easy to clean and disinfect by stamping.
◆ The sides of the table frame are inclined at an angle of 30 °.
◆ Leakage protection device, waterproof socket 220V/50Hz.
◆ Negative pressure exhaust system is inclined by the table top 30. The oblong holes on the inner side of the frame are exhausted downwards. The oblong holes are φ06x36mm. There are a total of 240 holes (need to be connected to the external exhaust system). The exhaust gas is used to reduce harmful gases in the room. Protecting operator safety.